freeamfva's Blog

The U.S. dollar traded overall weaker against other major currencies on the day of the FOMC decision, but also overall depreciated against most significant emerging market currencies with the USD/ZAR pair finally able to fall well below the 15.0-threshold.To get more news about global prime, you can visit wikifx.com official website.

Cryptos were also performing upbeat with Bitcoin trading at times above $41k, while Ethereum gained over the course of Wednesday more than five per cent and was close to the $2.8k mark.

Precious metals stabilised in the late afternoon on Wednesday after gold and silver traded new two-week lows with the gold price at times falling below the $1,900-level in the spot market.

On Thursday the Bank of England (BoE) is due to make its regular monetary policy announcement. It is widely expected that another 25 bp rate hike would be announced. Though there is not a complete consensus how exactly the monetary tightening will look live over the coming months as not only inflation is a factor to consider but also the reducing level of growth as indicated by a BoE report last week according to Reuters.

From the U.S. multiple potentially important economic indicators can be expected on Thursday, including the Philadelphia Fed General Business Conditions survey, data on housing starts and permits in February as well as capacity utilisation and industrial production as well as weekly new jobless claims.
At the end of the day the EUR/USD pair was settling higher, though compared to the volatility over the past week the daily market move might have seemed even timid given it was the day the Federal Reserve announced the first rate hike by 25 bp since 2018.

A rate hike in March and the announcement of rate hikes over the course of the next six remaining FOMC meetings was to be expected, while it was also announced that the Fed would shrink its almost $9 trillion balance sheet over following months.

On Thursday morning consumer price index (CPI) data will be published for the eurozone. It is expected that the annualized rate of inflation in February will noticeably increase compared to the 5.1 % seen in the previous month.
European stock market indices also performed very strongly on Wednesday in line with global trends with the Europe 50 index up by around four per cent. Though after the trading break at night the index opened significantly lower, losing roughly half the gains from Wednesday.

By Thursday morning the German industrial company Thyssenkrupp was one of the worst-performing blue chips in the regions trading down by more than seven per cent. Thyssenkrupp announced that it could no longer stick to its previous free cash flow before M&A forecast for 2021/22 due to the situation in Ukraine given the uncertainty if a spin-off of the steel division would still be possible.
Oil prices stabilised by Wednesday after dropping from the recent high for more than a week as WTI crude oil did not test the low from Tuesday anymore and traded steadily above $94 per barrel. Volatility also reduced with the price range on Wednesday between daily high and low only amounting to 5.4 %, while during the previous week oftentimes double-digit percentage moves were a common occurrence.

Besides the protracted situation in Ukraine and sanctions in place against Russia making some exports for Russian energy commodities to the global markets less feasible there have been other developments this week, in particular the worsening pandemic situation in China and the subsequent government restrictions, which affect the industry and in turn could affect the overall demand for energy.

Weekly crude oil stockpile numbers from the Energy Information Administration (EIA) were up by 4.3 million barrels compared to the previous week, which is an even bigger build compared to the 3.75 million barrels build announced by the American Petroleum Institute (API) on Tuesday.

Meanwhile the EIA predicted that oil prices would remain above $100 per barrel over the coming months given the geopolitical risk from the situation in Ukraine and current and even potential sanctions against Russia.

The Alfa Laval Product Guide is an easy-to-use tool to help you find the best solution for your application. It also lists local Alfa Laval partners and you can request a quotation for your selected product.Get more news about Alfa Laval Plates,you can vist our website!

And with the new Alfa Laval Web Shop, it’s never been easier to select and order the equipment you need. While online ordering is currently only for brazed heat exchanger models, some gasketed plate-and-frame heat exchangers will be available soon, as well as spare parts for plate heat exchangers and other equipment.For customers in the heavy process industries, having the right heat exchanger is critical for improving your sustainability, plant reliability and operating economy. But with so many options available today, finding the right one can be a complicated and time-consuming challenge.
The Alfa Laval HEXpert selector tool makes it quicker than ever to find your ideal heat exchanger. Just answer a few short questions and get a customized recommendation to meet your unique needs. The tool currently covers products for design pressures up to 100 bar and design temperatures up to 450° C.
Want to get more of the knowledge Alfa Laval has gained in our 8+ decades of experience in thermal transfer? Does your business need to access BIM files, 3D drawings or other consultant tools? Take a spin over to our Alfa Laval Heating & Cooling Hub for the latest resources for your industry.
Several factors can influence what type of plate heat exchanger offers the best fit for a specific duty. These can include type of media and refrigerant, design pressure, capacity needs, efficiency demands, serviceability requirements, and many more. Based on the specific needs and conditions of your operation, Alfa Laval can work with you to find the optimal plate heat exchanger for your duty. We offer the following online tools for guidance:

Plate heat exchangers are used in a wide range of duties, in almost every industry imaginable, all over the globe. At the Alfa Laval Heating and Cooling Hub, you can find a number of real-world application examples that demonstrate why having the right plate heat exchanger for the duty makes a real difference in process performance.
Different types of refrigerants have different properties and therefore require different heat exchanger designs. The optimal choice of heat exchanger may also be influenced by the specific application or duty in question. Alfa Laval is home to some of the leading experts in the use of synthetic and natural refrigerants with low global warming potential (GWP). Today we offer a wide portfolio of heat exchangers specifically engineered to meet the unique demands of working with hydrocarbons, CO2 and ammonia. In the knowledge bank section on Alfa Laval Heating and Cooling Hub, you will find videos explaining challenges and opportunities created by low-GWP refrigerants, as well as a detailed white paper available for download.

AHRI stands for the Air-Conditioning, Heating, and Refrigeration Institute. AHRI offers the market’s only third-party certification to ensure that heating, ventilation, air conditioning, refrigeration, and water heating products perform according to manufacturers’ published claims. Alfa Laval has AHRI certification for gasketed plate heat exchangers, brazed plate heat exchangers and fusion-bonded plate heat exchangers.
Alas Laval Plate Heat Exchanger are up to 5 times more efficient than Shell and Tube designs with approach temperatures as close as 1°F. The units are easily expandable, require 1/10 of the floor space and is less than 1/6 of the weight.

The gasketed plate heat exchanger consists of a series of thin, corrugated alloy plates which are gasketed and compressed together in a carbon steel frame to create ad arrangement of parallel flow channels

The CB or copper brazed plate heat exchangers feature efficient heat transfer with an extremely small footprint ideal for installations where space is at a premium. The CB units are perfect for small packaged applications.

There is a large body of written material on ozone and the use of ozone indoors. However, much of this material makes claims or draws conclusions without substantiation and sound science. In developing Ozone Generators that are Sold as Air Cleaners, the EPA reviewed a wide assortment of this literature, including information provided by a leading manufacturer of ozone generating devices. In keeping with EPA's policy of insuring that the information it provides is based on sound science, only peer reviewed, scientifically supported findings and conclusions were relied upon in developing this document.Get more news about ozone generator,you can vist our website!

Several brands of ozone generators have EPA establishment number on their packaging. This number helps EPA identify the specific facility that produces the product. The display of this number does not imply EPA endorsement or suggest in any way that EPA has found the product to be either safe or effective.

Please Note: EPA does not certify air cleaning devices. The Agency does not recommend air cleaning devices or manufacturers. If you need information on specific devices or manufacturers, one resource you can consult is the Association of Home Appliance Manufacturers (AHAM)EXITEXIT EPA WEBSITE, (202) 872-5955. AHAM conducts four certification programs for each category - room air cleaners, room air conditioners, dehumidifiers and refrigerator/freezers. The air cleaner certification program is known as AC-1.
Ozone generators that are sold as air cleaners intentionally produce the gas ozone. Often the vendors of ozone generators make statements and distribute material that lead the public to believe that these devices are always safe and effective in controlling indoor air pollution. For almost a century, health professionals have refuted these claims (Sawyer, et. al 1913; Salls, 1927; Boeniger, 1995; American Lung Association, 1997; Al-Ahmady, 1997). The purpose of this document is to provide accurate information regarding the use of ozone-generating devices in indoor occupied spaces. This information is based on the most credible scientific evidence currently available.

Some vendors suggest that these devices have been approved by the federal government for use in occupied spaces. To the contrary, NO agency of the federal government has approved these devices for use in occupied spaces. Because of these claims, and because ozone can cause health problems at high concentrations, several federal government agencies have worked in consultation with the U.S. Environmental Protection Agency to produce this public information document.
Ozone is a molecule composed of three atoms of oxygen. Two atoms of oxygen form the basic oxygen molecule--the oxygen we breathe that is essential to life. The third oxygen atom can detach from the ozone molecule, and re-attach to molecules of other substances, thereby altering their chemical composition. It is this ability to react with other substances that forms the basis of manufacturers’ claims.

The same chemical properties that allow high concentrations of ozone to react with organic material outside the body give it the ability to react with similar organic material that makes up the body, and potentially cause harmful health consequences. When inhaled, ozone can damage the lungs. Relatively low amounts can cause chest pain, coughing, shortness of breath and throat irritation. Ozone may also worsen chronic respiratory diseases such as asthma and compromise the ability of the body to fight respiratory infections. People vary widely in their susceptibility to ozone. Healthy people, as well as those with respiratory difficulty, can experience breathing problems when exposed to ozone. Exercise during exposure to ozone causes a greater amount of ozone to be inhaled, and increases the risk of harmful respiratory effects. Recovery from the harmful effects can occur following short-term exposure to low levels of ozone, but health effects may become more damaging and recovery less certain at higher levels or from longer exposures (US EPA, 1996a, 1996b).

We’ve all been there. You step inside on a hot day and are mercifully greeted with a wall of cool air. Well, you have the refrigeration cycle to thank for that relief. While there are dozens of methods of heating and cooling, the basic function is still the same and is used in some form across countless industries and processes. But how does it work? This post will answer that question by outlining the main components of a standard refrigeration loop and the functions of each.Get more news about Condenser Expansion Machine,you can vist our website!

In simple terms, a refrigeration cycle's mission is heat absorption and heat rejection. As any HVAC instructor will tell you (emphatically), you can't make cold, you can just remove heat. The refrigeration cycle, sometimes called a heat pump cycle, is a means of routing heat away from the area you want to cool. This is accomplished by manipulating the pressure of the working refrigerant (air, water, synthetic refrigerants, etc.) through a cycle of compression and expansion.

Don’t get left out in the cold when it comes to heat transfer information. To stay up to date on a variety of topics on the subject, subscribe to The Super Blog, our technical blog, Doctor's Orders, and follow us on LinkedIn, Twitter, and YouTube.

That’s not the full picture, of course, but that’s the basic idea. Now, let’s get into the equipment that helps execute that job. There are certainly other components in most loops, but most would agree the four fundamental elements of a basic cycle are as follows:
Compression is the first step in the refrigeration cycle, and a compressor is the piece of equipment that increases the pressure of the working gas. Refrigerant enters the compressor as low-pressure, low-temperature gas, and leaves the compressor as a high-pressure, high-temperature gas.

The condenser, or condenser coil, is one of two types of heat exchangers used in a basic refrigeration loop. This component is supplied with high-temperature high-pressure, vaporized refrigerant coming off the compressor. The condenser removes heat from the hot refrigerant vapor gas vapor until it condenses into a saturated liquid state, a.k.a. condensation.

These components come in a few different designs. Popular configurations include fixed orifices, thermostatic expansion valves (TXV) or thermal expansion valves (pictured above), and the more advanced electronic expansion valves (EEVs). But regardless of configuration, the job of a system’s expansion device is the same - create a drop in pressure after the refrigerant leaves the condenser. This pressure drop will cause some of that refrigerant to quickly boil, creating a two-phase mixture.

The evaporator is the second heat exchanger in a standard refrigeration circuit, and like the condenser, it’s named for its basic function. It serves as the “business end” of a refrigeration cycle, given that it does what we expect air conditioning to do – absorb heat.

This happens when refrigerant enters the evaporator as a low temperature liquid at low pressure, and a fan forces air across the evaporator’s fins, cooling the air by absorbing the heat from the space in question into the refrigerant.

After doing so, the refrigerant is sent back to the compressor, where the process restarts. And that, in a nutshell, is how a refrigeration loop works. If you have any questions about the refrigeration cycle or its components and how they work, give us a call. We've been helping customers get the most out of their HVAC and refrigeration equipment for nearly 100 years.

The elastic pin coupling is a new design, through excellent processing technology and high-quality raw materials, the performance of elastic pin coupling up to a higher standard. We are perfect for every detail of the elastic pin coupling, guarantee the quality level, so as to bring you the perfect product experience. HZCD（Foshan Houzhe Transmission Equipment Co.,Ltd） is a professional China elastic pin coupling manufacturer and supplier, if you are looking for the best elastic pin coupling with low price, consult us now!Get more news about Elastic Pin Coupling Wholesaler,you can vist our website!
The material of the elastic element is generally nylon, which has little ability to compensate the offset of the two axes.
The elastic parts are sheared when working.Its reliability is extremely poor. It is only suitable for low and medium-speed transmission shafts, not suitable for high reliability requirements, such as the transmission shaft of the lifting mechanism.should absolutely aovid.

If low-speed and load-bearing transmission shafts with strong impact,If with large radial and angular offsets ,If required low installation accuracy,those three condition should not use elastic pin coupling .
Structural Features

The elastic element is nylon, which has high strength and wear resistance,It is suitable for corrosive environments.The outer surface of the steel brake wheel is quenched.

Mark methods of Type and size, hole and keyway are in accordance with GBT3852-1997 , and the two half coupling shaft hole types can be combined random combination.

5.The original model refers to the GB5015-85 series
The structure is simple, with cushioning and shock absorption performance, some axis offset compensation ability,

Suitable for noise unnecessary controll environiment .

Allowable compensation amount Radial 0.15-0.25mm Angle 0.5 °.

Specific models are HL1, HL2, HL3, HL4, HL5, HL6, HL7, HL8, HL9, HL10, HL11, HL12, HL13, HL14
Due to the difference in heating between the inside and outside, the expansion is uneven, resulting in internal stress, called thermal stress. If the temperature is too high during annealing,will cause graphite cross-section. Will more difficult to cut and processing ,but also overheat and deform during quenching. Decarburization causes soft spots on the surface, which will reducing the surface hardness, wear resistance and fatigue strength.

2 Decarburization refers to the phenomenon that all or part of the carbon on the steel surface is burned off.

3 Overheating means that the steel exceeds the allowable temperature during heating,it will cause coarse grain

Multipro mattress packing machine is a powerful compression pack machine for mattress. You can compress & pack big size of mattress in this machine. This machine will auto seal the plastic bag. This mattress packing machine is having automatic cooling & heating time setting. So that you can seal & pack any thickness of bag.Get more news about vacuum hydraulic machine,you can vist our website!
Hydraulic drawing press able to form sheet material or open-ended hollow billets into container-shaped components
It is specially designed for industries of aluminum alloy, carbon steel and stainless steel products and mainly applicable to metal and plastic materials press forming process, including deep drawing, edge folding, stamping, forming and straightening
Performances and features:
1) Master cylinder adapt piston-type master-slave structure, embedded with a fast lever to control rapid descending, thereby effectively minimize the redundant time of no-load descend and return stroke by 10% of normal hydraulic drawing press
2) Equipment good at reverse-drawing technique, which characterized by effectively reducing mold cost and mold structure simplification, especially applicable for ultra-thin sheet material deep drawing process
3) Use of closed-loop servo system control allows real-time adjustment of blank holder force, as well as ensure uniform blank holder force and the consistency and precision of products
4) Equipment is applicable for the material of stainless steel, carbon steel, copper, aluminum sheets and composite materials with minimum thickness ≤0.2mm to maximum thickness ≥5mm and a maximum diameter of 2000mm
5) Guide sleeve of posts are designed and manufactured with the patent of our company numbered ZL 201320060553.7
Descriptions:
Our servo 4-post hydraulic drawing press adapt closed-loop servo system control, enable dynamic automatic adjustment which is especially suitable for ultra-thin sheet material deep drawing process and manufacture components with high forming limit and quality requirements
Applications:
Equipment is specially designed and manufactured for industries of aluminum alloy, titanium alloy, copper, stainless steel, carbon steel and thin iron products
It is especially suitable for deep drawing of thin metal sheets and press forming of stainless steel sheet material, includes aluminum alloy/stainless steel kitchen wares, punching/stamping, edge folding and deep drawing process of household appliances, the shock absorber of automobiles, engine oil pan

We enjoy an extremely good status among our prospects for our great merchandise top quality, competitive price and the ideal service for Steel Rolling Up Door, Tile Roofing Forming Machines, Shutter Soleplate Machines. We adhere to the business philosophy of integrity first, operating in accordance with the law, and benefit sharing. We regard quality as life and customers as God. We are willing to work together with friends from all walks of life to create a better tomorrow! We believe we can provide you with caring service and high-quality products . We fully exploit the internal potential, strengthening horizontal alliances, joint ventures, and expanding the scope of services.Get more news about double deck compression forming machine,you can vist our website!

Product Introduction

2in1 Roll Forming Machines can realize highly automated assembly line production, and the equipment has high stability, high production efficiency and low defective rate. The equipment is easy to maintain. Also, roll forming has low investment, and can be quickly put into production with high output, and roll forming is energy-saving, environmentally friendly, efficient, and the cold-formed products are suitable for multiple fields, such as construction, decoration, machinery manufacturing, automobile manufacturing, etc.

Features

2in1 Roll Forming Machines can produce different shapes of steel roof wall sheets according to the client' s profile drawings and requirements. Its advantages also include flexible use, easy to install, short construction period, strong bending and compression resistance.
In today's world, sustainable lifestyles are more important than ever, therefore we strive to innovate the 2 in 1 Double Decker Trapezoidal Corrugated Steel Roof Panel Metal Roofing Machine and transform production methods. We warmly welcome customers from home and abroad to visit our company, and to cooperate with us for a splendid future together. 'Concentration, vitality, innovation, dedication' is our label. We will always adhere to the development tenet of 'carrying forward the craftsman spirit, pioneering and enterprising', and strive to create products with market competitiveness.

Berkshire Photonics manufactures precision, high-quality custom fiber optic assemblies for medical, harsh environment, industrial, sensing, and defense applications. Assemblies are available with single-mode, polarization maintaining, and multimode fibers. All of our assemblies are made with the highest quality fiber, connectors, and jacketing, and are tested to industry standard protocols. Berkshire Photonics specializes in custom, build-to-order assemblies. No order is too small or too big; too simple or too complex. Our team will work with you every step of the way to meet your requirements and exceed your expectations. Please view our pigtails, jumpers, and bundles for additional information.Get more news about Fiber Jumper,you can vist our website!

Through new UniClick™ technology, Siemon has enhanced the popular LC BladePatch® connector used in jumpers and trunk assemblies. The UniClick™ uniboot features a one-piece body with an integrated switch to make it faster and easier to change polarity, with no loose parts. The streamlined footprint provides an even better fit in high density applications including patching fields and active equipment. The LC BladePatch retains its smooth push-pull functionality and low loss performance to suit any application.
New UniClick™ technology enables fast and easy access to polarity change via rotating latches
Smaller uniboot profile ensures a perfect fit in high density patching and compact transceiver modules
Push-pull control of the latch allows access in dense environments with limited hand access
Small diameter uni-tube cable reduces pathway fill and improves airflow
Low loss performance with 100% inspection to ensure superior performance and quality
Also available in LC-LC and MTP-LC trunk assemblies to suit various channel configurations

A theoretical model is developed to study the superior sound absorption performance of ultralight mirco-perforated sandwich panels with double-layer hierarchical honeycomb core. Numerical simulations are performed to validate theoretical model predictions and explore physical mechanisms underlying the sound absorption. Systematic parametric study is implemented to investigate the influence of specific structural parameters on sound absorption. To maximize sound absorption, optimal structural parameters of the hierarchical sandwich are obtained using the method of simulated annealing. It is demonstrated that viscous dissipation of the air inside micro-perforations and around inlet/outlet regions dominates sound absorption. Compared to micro-perforated sandwich panels with regular honeycomb core, not only the proposed hierarchical construction has much improved load-bearing capacity, but also significantly enhanced sound absorption covers a wide range of frequency.Get more news about Bh-sandwich Panel Series,you can vist our website!

Recently, insect-mimicking micro-drones have attracted attention owing to their numerous potential applications. For use as the exoskeletons of these micro-drones, a monolithic sandwich panel with a total thickness of 1 mm was fabricated in this study via a novel technique employing metallic foil with a microlattice core. The face sheets were appropriately designed to be thicker than the foils comprising the core to obtain high failure moments and flexural rigidities. Using this approach, we successfully realized mechanical properties superior to those of the elytra of beetles at a comparable areal density. The mechanical behaviors of the panels were evaluated via theory and finite element analysis (FEA), and the optimal combinations of the two thicknesses of the foils comprising the face sheets and the cores for achieving the maximum strengths for the given areal densities were identified. The sandwich panels are expected to have sufficiently high failure moments and rigidities even with half-height cores, exhibiting great potential for use in insect-mimicking micro-drones.

Insect-mimicking micro-drones have recently attracted considerable research attention owing to their broad range of prospective applications. One of the technical challenges to be addressed for the realization of micro-drones is the development of a novel structure that is ultralight while being sufficiently robust to protect the inner components from impact. For achieving such a structure, a very thin sandwich panel appears to be a rational choice. As an example, Figs. 1(a) and (b) show the elytra of a beetle and its cross section [1], respectively, revealing the sandwich architecture. We believe that an insect-mimicking drone should have an exoskeleton composed of sandwich panels, similar to the elytra of a beetle.

Keystone’s LED high power floodlights combine formidable illumination with substantial SKU reduction, thanks to power output and color temperature adjustability coupled with dual mounting options.Get more news about Anti-surge Flood Light,you can vist our website!

They’re ideal for buildings that need lighting capabilities for spacious areas, such as parking lots, building facades, or recreation venues, whether for ground, pole, or building mount applications.

The floodlights come in two options, both with substantial lighting capabilities. The lower power model features Power Select choices of 100W and 140W, with a top end of 19,600 lumens, while the higher power model offers 210W and 290W and a top end of 40,600 lumens.

Both include Keystone’s Color Select technology, with color temperature choices of 3000K, 4000K, and 5000K.

Each floodlight fixture includes two heavy-duty mounting options: a trunnion mount for buildings and walls, and a slipfitter mount for installing on poles. Both are dimmable and feature a replaceable, dusk-to-dawn photocell, which ensures that the floodlight fixtures only operate when darkness is detected.

Product Benefits:
Reduces SKUs with selectable power outputs (140W/100W and 290W/210W) and color temperatures (3000K/4000K/5000K)
Ensures easy installation with included heavy-duty slipfitter and trunnion mounts
3-pin twist lock photocell and shorting cap included with NEMA/ANSI C136.10 3-pin twist lock receptacle
Provides energy savings and reliability with Keystone 0-10V dimming LED driver with 12V AUX power tap and 6kV surge protection
Glare shield and lens kits for multiple beam angles available
Protected from the elements with IP65 rating
Additional Product Features:
Suitable for ground, pole, or building mount applications
Die-cast aluminum housing, with optional glare shield accessory (sold separately)
Ambient operating temperature: -40°C/-40°F – 50°C/122°F
UL and DLC 5.1 listed
Power factor: >.95
THD: <20%
LED chip lifetime: L70 >100,000 hrs @ 25°C/77°F ambient fixture temperature
Meets FCC Part 15, Part B, Class A standards for conducted and radiated emissions